
Neolith® Thin-Set Vanner System
Mixed hidden longitudinal fastening system
Neolith® due to the physical and mechanical characteristics is an ideal architectural product to be used for facades applications.
Thin-set application its one of the most common facades system. Neolith® confers a very light solution with no maintenance and proposing a large possibilities of designs.
It is the simplest form, panels can be attached using Neolith® reccomended thin-set adhesives to create a chemical bond between Neolith panel and an appropriate substrate.
There are a number of benefits of this direct-set installation, not the least of which is the complete lack of any need for mechanical fasteners. The adhesive attachment is done completely on the back side of the panel, which means the panel joints are all that is seen on the face.
GENERAL SPECS
Minimum Joint Requirements – 1/8″
Formal Limitation – None
Thin-Set System vertical section – Precast, Concrete and Mansory Wall Construction
- Water Resisteive Barrier
- LATH + Mortar Scratch Coat
- Adhesive Mortar
- Neolith® Slab
- Precast/Concrete/Mansory
Thin-Set System vertical section – Wood and Metal Studs Wall Construction
- Water Resisteive Barrier
- LATH + Mortar Scratch Coat
- Adhesive Mortar
- Neolith® Slab
- Sheating